Usage: Fosroc fosroc resistant coating provides wear protection coatings PUW a matte coating for a variety of epoxy surface and the concrete surface, especially for the occasion has a higher environmental requirements. Advantages: 1, environmentally safe water-based products, construction and use no odor. 2, easy to use, you can brush / roller / spraying scene after mixing. 3, save labor, without base oil, can secure curable epoxy coating or base surface of concrete construction directly, with high adhesion. 4, an oxygen coating or concrete base surface construction, with high adhesion. 5, matte finish, can not be achieved by the formation of an oily product matte. 6, anti-UV, polyurethane structure of the product can provide good UV resistance. 7, abrasion / hardness, the results of two-component curing insurable coating has good wear resistance and hardness. Product features: low temperature resistance no cracking, no peeling @ -45 degrees / 7d high temperature without cracking, no peeling @ 115 degrees / 7d impact resistance without cracking, no peeling @ 1000g / 1m wear (750g / 500r) 0.018g skid resistance (dry friction coefficient)> 0.50 flexibility without cracking, peeling from the floor @ 0 @ 2mm adhesion with epoxy coating hardness of about 3H tensile bond strength> 3MPa (cement specimen damage) chemical character 72h no blistering, no peeling 120 # solvent gasoline 72h no blistering, no peeling 20% ??sodium oxide 72h no blistering, no peeling of 10% sulfuric acid 72h no blistering, no peeling water resistance without peeling, discoloration, blistering More info polyurethane floor http://www.fosroccn.com/cp/5/64.html